Area of use / certification

  • Onshore/offshore:


  • Description:
    Key mill
  • Fabricator:
  • Model:
  • Serial no.:


  • Power Options:

Additional information

  • Equipment / Functions:

    A rugged performer designed with a 2 inch (50.8 mm) sideshift to cut wide keyways at minimal cost. Versatile, smooth and precise, it mounts anywhere along a shaft, at any angle, and eliminates the need for a costly assortment of different size cutters.

    For shaft diameters ranging from 4 to 24 inches (101.6 to 609.6 mm).

    Keyway Length: 8" (203.2 mm)

    Keyway Width: 3.25" with 2" sideshift (82.6 mm with 50.8 mm sideshift)

    Shaft Diameter: 4"-24" (101.6 – 609.6 mm)

    High quality, heavy-duty machine

    - Cuts new keyways up to 3.25 inches (82.6 mm) wide and 7.88 inches (200.2 mm) long in one setup.

    - Two-inch (50.8 mm) lateral travel allows cutting wide pockets or slots with a single end mill.

    - Universal type motor and triple gear reduction provide plenty of torque.

    - Permanently sealed lubrication, so machine can be operated at any angle.

    - The leadscrew is a precision Acme thread and is fitted with roller thrust bearings.

    - Anti-friction bearings used throughout.

    - Dovetail ways machined for smooth movement in both longitudinal and transversal directions.

    - Features zeroing-type adjusting dial for controlling cutter depth.

    - Contoured base is self-centering and self-aligning on the shaft.

    - Electronic speed control offers precision control of spindle speeds while retaining full torque over available rpm range.

    Compact, easy to set up, versatile

    - Needs only 8.5 inches (215.9 mm) of shaft for clamping, or only 10.5 inches (266.7 mm) of shaft for clamping from an obstruction.

    - Mounts on shafts from 4 – 24 inches (101.6 – 609.6 mm) in diameter.

    - Mounts anywhere along the shaft.

    - Rapid longitudinal travel can be made with a drill motor for quick setups.

    Technical Data

    - 0.75 inches (19.05 mm) is the standard spindle size for inch-machines.

    - 20 mm (0.79 inches) is the standard spindle size for metric machines.