PP-118A
PUMP FOR PIGGING / CHEMICAL CLEANING
Dimensions
-
Length(mm):
5875
-
Width(mm):
2438
-
Height(mm):
3035
-
Weight (kg):
20000
-
Lifting/ Transportation:
20’ Offshore ISO container with forklift channels and lifting slings in accordance to DNV 2.7-1 . Can be stacked in height with use of ISO locks Ref.cert. / Ser. no. frame : PP-118A / HHP-20/1
Construction year
-
Built:
2010
Area of use / certification
-
Onshore/offshore:
Offshore
-
Standard:
Offshore Zone 2, 83dBA, Norsok Z-015 SOLAS 74 Ch.11-2, ATEX II 3G IIA T3
-
Power (Electrical/Diesel):
Diesel
Flow / Pressure / Volume
-
Hz v Q-max measure:
N/A (Diesel)
-
Hz v P-max measure:
N/A (Diesel)
-
Diesel Tank Volume (ltr):
1200
-
Diesel consumption (ltr/hr):
220
Pump(s)
-
Pump1 (type):
MUST BE CONNECTED TO SEPERATE PUMP UNIT (PP-118B)
Motor / Engine(s)
-
Motor1 (type):
Caterpillar C-32 1450BHP (900HHP)
-
Motor1 (Cert. No.):
RNY 00421
Power supply
-
Fuse (qty):
1
-
Fuse (A):
16
-
El.Power1:
110-230V
-
(Hz):
50/60
-
(A):
10-16
-
Control Panel:
Ceag GHG 6645 (Ser. No: J1972DS) Eexde IIC T6 230 V, 1 phase, 2,5 A, 50/60 Hz
Additional information
-
Equipment / Functions:
MUST BE CONNECTED TO SEPERATE PUMP UNIT (PP-118B), (see separate datasheets for technical information)
- Diesel tank is located at pump unit, Diesel level must be limited to 600 liters for offshore use.
- Signal to platform if : Fire and gas alarm
- Novec 1230 Fire extinguishing system
- Fire extinguisher 12kg.
- Unit is certified by Notified Body (DNV) to run without flame traps in the exhaust in hazardous area (Zone 2).
- Two-piece unit, where the engine and pump has to be connected via a drive shaft, hydraulic and diesel hoses.
MOTOR SHUT DOWN IF:
- To high r.p.m on motor.
- High exhaust temperature.
- Emergency stop from control room
- High coolant temperature.
- Emergency stop.
- Low level coolant
- Fire alarm
- Low oil pressure.
- 10% Lel Gas alarm.