PP-71C
PUMP FOR PIGGING / CHEMICAL CLEANING
Dimensions
-
Length(mm):
2438
-
Width(mm):
2438
-
Height(mm):
2896
-
Weight (kg):
8000
-
Lifting/ Transportation:
8’ Offshore ISO container with forklift channels and lifting slings. DNV 2.7-1 Can be stacked in height with use of ISO locks
Construction year
-
Built:
2013
Area of use / certification
-
Onshore/offshore:
Offshore
-
Standard:
Offshore, Zone II, Norsok Z-015, ATEX II 3G IIA T3
-
Power (Electrical/Diesel):
Diesel
Flow / Pressure / Volume
-
Hz v Q-max measure:
N/A (Diesel)
-
Q-max (l/min):
16666
-
Hz v P-max measure:
N/A (Diesel)
- P-max (bar):
-
Flowrate1:
16666 ltr/min @ 20,5 bar (8.gear, 2865 RPM)
-
Flowrate2:
4375 ltr/min @ 27 bar (8.gear, 2865 RPM), Q min.
-
Flowrate3:
14666 ltr/min @ 14 bar (8.gear, 2388 RPM)
-
Diesel Tank Volume (ltr):
1200
-
Diesel consumption (ltr/hr):
160
Connections
-
Inlet connection:
10” 150# RF
-
Outlet connection:
8” 300# RF
Pump(s)
-
Pump1 (type):
KSB Heavy Duty Centrifugal Pump RPH A8 200-450A, API 610
Motor / Engine(s)
-
Motor1 (type):
MUST BE CONNECTED TO SEPERATE MOTOR UNIT (PP-71A)
Power supply
-
(A):
10-16
Additional information
-
Equipment / Functions:
MUST BE CONNECTED TO SEPERATE MOTOR UNIT (PP-71A), (see separate datasheets for technical information)
Two-piece unit, where the engine and pump has to be connected via a drive shaft, hydraulic and diesel hoses
Device is remotely controlled.
Two-piece unit, where the engine has 8 step gear, but only 7rd and 8rd gear is used for running the centrifugal pump.
7.gear: pump speed between 1500 – 2100 rpm
8.gear: pump speed between 2085 – 2900 rpm
- Pump equipped with 8”300# gatevalve to regulate flow and pressure.
- Lighting, Hydraulic radiator with thermostat fitted in the pump for cooling,
- Swordsman foam system. Device is remotely controlled.